Osram PrevaLED Core Z3 Instrukcja Użytkownika Pobierz pdf (Strona 10)

PrevaLED

Core Z3 LED modules | Electrical considerations

3.3 Wiring

The input clamps used in the PrevaLED

Core Z3 can hand-

le solid wires with a cross-section of 0.5–1.0 mm

(AWG 21-17).

Example: H05V-U 1x 0.5 mm2

Please note:

— The connector is designed for three “poke-in” and

release cycles.

— The installation of LED modules needs to be carried out

in compliance with all applicable electrical and safety

standards. Only qualiﬁ ed personnel should be allowed to

perform installations.

— If you cannot use solid wires, you can use stranded wires

with a diameter of 0.5 to 0.75 mm and tin-coat the wire

ends before inserting them into the connection clamp.

For wires with

1 mm

(AWG17):

5.5 mm

For wires with

0.5-0.823 mm

(AWG21–18):

5.3 +- 0.2 mm

Wire preparation

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Brak uwag

Osram PrevaLED Core Z3 Instrukcja Użytkownika Strona 10